Hindmechanisch Precision Tools Private Limited

 FEATURES / USES :

• Toughened En8, 22 to 28 HRC.
• Rolled threads.
• Finish - Blackodized.
• Used in jig-fixtures, hydraulic equipment as one of the clamping element.
• Sizes - M8 to  M30

• Useful for clamping the job from top or bottom
• The ball swivels and provides contact with no damage to surface.

•  Body Steel.
•  Ball : Hardened bearing quality.

•  Body, Blackodized. Ball hardened.

• These self-aligning pads serve as stops, supports & thrust elements in Jigs & Fixtures. They can also be fitted to existing clamping elements.
• These pads are useful for holing components firmly on machines, While eliminating chances of vibration / chatter which may be induced due to insufficient clamping forces exerted due to point contact.

FEATURES / USES :

• En8 heat treated to 22 to 28 HRC
• Blackodized / Zinc Plated Finish

APPLICATION :

• Useful for the machines having 'T' slots, jig-fixtures.
• Hydraulic elements, assorted setting elements and adopters As illustrated
• size - M6 To M16

FEATURES / USES :  

• Heat treated to 22 to 28 HRC To couple the stud for the purpose of increasing the length.
• Sizes - M8 to M30 

FEATURES / USES :

• Heat treatment to 22 to 28 HRC
• Finish - Blackodized
• rolled Threads
• Used for machines having 'T' slot's
• Sizes - TB10 / TB12 / TB14 / TB16 / TB18 / TB20

• Spring plungers are used for variety of applications.
• Used in Jigs & Fixtures.
• Machine tool buildings, welding fixture.
• Plastic moulding machines , etc.
• These all are used wherever the return of job to the position is required.
• These are also required for wiper motors & limit switches.
• With internal hexagon & pin type plunger. slot at plunger end for adjustment.
• size - M5 To M16

FEATURES / USES :

• Toughened En8, 22 to 28 HRC
• Finish-Blackodized
• Widely used in most of the clamping system.
• Process to be economical in comparison of hex nut & washer
• Sizes - M8 To M24

FEATURES / USES :

• Steel heat treated Blackodized finish.
• In the construction of fixtures having special application as spacer or clamping element because it could be swung out of the way and the part can be inserted or removed quickly.
• sizes - M8 to M30 

FEATURES / USES :

•  22 to 30 HRC.
• Blackodized finish.
• Used on machine for clamping work pieces.
• size - M8 To M30

FEATURES / USES :

• C45 Heat treated to 22 to 28 HRC Finish - Blackbodies used in Jig fixtures, hydraulic equipment.
• Sizes - M8 To M30 

• Spring plungers are used for variety of applications.
• Used in Jigs & Fixtures.
• Machine tool buildings, welding fixture.
• Plastic moulding machines , etc.
• These all are used wherever the return of job to the position is required.
• These are also required for wiper motors & limit switches.
• size - M5 To M16

• Useful for clamping the job from top or bottom.
• The ball swivels and provides contact with no damage to surface.

•  Body Steel.
•  Ball : Hardened bearing quality.

• Body, Blackodized. Ball hardened.

• These self-aligning pads serve as stops, supports & thrust elements in Jigs & Fixtures. They can also be fitted to existing clamping elements.
•  These pads are useful for holing components firmly on machines, While eliminating chances of vibration / chatter which may be induced due to insufficient clamping forces exerted due to point contact.

FEATURES / USES :

•  Toughened Cn8 to 22 to 30 HRC 
• Finish-Blackodized 
• Widely used in most of the clamping system.
• sizes - M8 To M30

FEATURES :

•  Used to obtain required supporting heights.
• Any combination keeps the accurate parallelism.

APPLICATION :

• Used as a supporting block on any machine.

MATERIAL : 

• S. G. Iron with high tensile strength.

FINISH :

• BlackodizedFEATURES :
  •  Used to obtain required supporting heights.
  • Any combination keeps the accurate parallelism.

  APPLICATION :

  • Used as a supporting block on any machine.

  MATERIAL : 

  • S. G. Iron with high tensile strength.

  FINISH :

  • Blackodized

Body and spindle :

• Medium carbon steel , heat treated , blackened .

Spindal Threads :

• Trapezoidal self locking with end stop body.
• 40MM / 50MM / 75MM / 100MM / 140MM

MATERIAL :

• Heat treated 22 to 30 HRC
• Blackodized
• size - M8 To M24

• Low height & side clamping, leaving the entire top surface free for machining
• Effective & positive clamping of inflate jobs like plates, flats irrespective of the size
• Spherical washer is used in plate clamp to avoid it from swiveling
• Springs are provided for quick release of clamping force & jaws
• Due to low height it is suitable for clamping work piece with small contact area e. g. Plates, flats
• Useful for clamping the job whose height is five mm more then the thickness of Plate clamp
• Develops a high Tightening force

• Suitable to use on milling, shaping, planning machine etc.

•  Made of Hardened steel

•  Blackodized

• Required supporting height is achieved instantaneously with quick adjustment of plates.
• Required extra height could be achieved by stacking the blocks.
• Economical & saves time & human fatigue in getting required spacers every time.
• Compact, safe & reliable supporting system.
• Used with or without exact height setter.

• Suitable to use any machine as supporting height block or spacer.

•  Made of steel.

•  Blackodized.

• Useful for clamping the job from top or bottom.
• The ball swivels and provides contact with no damage to surface.

•  Body Steel.
•  Ball : Hardened bearing quality.

• Body, Blackodized. Ball hardened.

• These self-aligning pads serve as stops, supports & thrust elements in Jigs & Fixtures. They can also be fitted to existing clamping elements.
•  These pads are useful for holing components firmly on machines, While eliminating chances of vibration / chatter which may be induced due to insufficient clamping forces exerted due to point contact.